Zkteco Ua300 Factory Reset ((new)) Official

Here are the most reliable methods to perform a factory reset on the ZKTeco UA300, ordered from simplest to most advanced.

A factory reset restores the UA300 to its original out-of-the-box state. , including:

Press , enter user ID 8888 or 9999 , and type the generated master password to gain entry and initiate a reset. Default Factory Settings Reference zkteco ua300 factory reset

Release the button and wait for the system to boot into its original factory state. Post-Reset Checklist

Performing a factory reset on your ZKTeco UA300 time attendance terminal restores the device to its original out-of-the-box settings. This process is necessary if you lose the administrator password, experience severe software glitches, or plan to redeploy the device in a new environment. Here are the most reliable methods to perform

If your UA300 is connected to your Local Area Network (LAN), you can clear the administrator using the official ZKTime software. This is often the most convenient method:

to regain control. You can then proceed with the factory reset from Method 1. Method 3: Hardware Reset (Tamper Switch) Default Factory Settings Reference Release the button and

: Once the main screen appears, wait approximately 30–60 seconds until you hear a short beep.