[Connect Battery] ➔ [Self-Test / Voltage Check] ➔ [Bulk Charge] ➔ [Finish Charge] ➔ [Auto Shut-Off] Starting a Normal Charge Cycle Inspect the DC cables and connectors for damage.
The chassis must be properly grounded via the AC power cord to mitigate shock hazards. 3. Step-by-Step Operating Instructions
This comprehensive guide serves as an operational manual and reference tool for the Exide 2100 RP charger series. Safety Warnings and Precautions
Ensure the connector polarity is correct, matching the battery connector. Improper connection can cause damage to the output fuse.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. exide 2100 rp charger manual
Press the Stop button (if equipped) before disconnecting the battery to prevent hazardous arcing. Equalization Charge
: Inspect cables and connectors monthly for wear or overheating. Ensure the ventilation intake and exhaust paths remain unobstructed. Equalization : The charger features an Auto-Balance
Check the charger cables and the battery connectors for physical damage, cracks, or heavy corrosion. Do not plug the charger into a damaged connector. Step 2: Connection
Current tapers off as the battery reaches full voltage. [Connect Battery] ➔ [Self-Test / Voltage Check] ➔
: Once connected, the charger typically detects the battery voltage and type automatically. Select Charge Mode button to toggle between: : For standard, full recharge cycles. Opportunity : Best for quick top-ups during breaks or shift changes.
[Mains Supply AC Input] ──> [External Lockable Isolator] ──> [Exide 2100 RP Charger] ──> [Insulated Shrouded DC Plug] ──> [Battery] 2100 RP TP Instr For Use Multilingual | PDF - Scribd
: Leave at least 200mm (approx. 8 inches) of space at the top and ensure ventilation slots are unobstructed.
The charger housing is designed for indoor use only. Avoid exposure to water, rain, or high-humidity environments. Electrical Connections This public link is valid for 7 days
Plug the battery connector firmly into the charger’s DC output connector.
: The charger stops automatically when full. Always turn the charger OFF before disconnecting leads to prevent sparks. 💡 LED Indicator Guide GNB NP Marathon M FT - Exide Technologies
Equipped with internal sensors, the charger adjusts the charging voltage based on the ambient temperature. This ensures the battery is not overcharged in summer or undercharged in winter.