Updating the firmware on your TRONXY XY-2 Pro is a relatively straightforward process. Here's a step-by-step guide to help you through it:
Firmware changes wipe out previous distance data. Carefully re-level your bed and set your probe Z-offset using a standard piece of paper to avoid dragging your nozzle across the print bed.
The latest Marlin source code package and the Tronxy-specific configuration templates (found in the Marlin Configurations repository on GitHub). Step-by-Step Compilation and Flashing:
The V6 (or "S" board) is locked. You cannot easily flash Marlin to it due to locked bootloaders. You must buy an MKS Robin Nano V3 as a drop-in replacement.
The is not as simple as updating a smartphone, but it is manageable. tronxy xy-2 pro firmware update
For makers seeking peak performance, Marlin is the gold standard of open-source 3D printer firmware. It offers superior customization and allows you to utilize advanced slicer settings like Linear Advance. Step 1: Prepare Your Development Environment
The XY-2 Pro has different motherboard versions (e.g., CHT-3D-V5, V6, etc.). Flashing the wrong firmware can permanently damage your board. Open your printer's electronics case to check the board revision.
Updating to open-source firmware allows you to fine-tune your stepper motor currents, adjust maximum temperatures, and customize user interface menus. Knowing Your Mainboard: The Crucial First Step
The firmware updated successfully, but the UI assets folder did not flash. Ensure the graphical folders ( ui or code ) were copied properly to the root of the card and re-flash. Issue 3: Inverted Axis Movements or Inverted Endstops Updating the firmware on your TRONXY XY-2 Pro
Advanced users wanting full control over features like Linear Advance, Babystepping, and M600 filament changes.
Before downloading any software, you must identify the exact mainboard installed inside your Tronxy XY-2 Pro. Tronxy has shipped this printer with different control boards over its production run, and flashing the wrong firmware can permanently "brick" (render useless) your motherboard. How to Identify Your Board Unplug the power cable from your printer.
A firmware update resets your printer to factory defaults. You must recalibrate everything.
If your prints are the wrong size, you may need to update the extruder or axis steps/mm using the settings saved in the backup step. The latest Marlin source code package and the
Most Tronxy updates do not require a USB connection; they can be flashed directly from an SD card. Ensure your SD card is FAT32 formatted.
Before downloading any firmware files, you must identify your printer's mainboard. Tronxy has shipped the XY-2 Pro with different mainboards over its production lifecycle (such as Chitu-based boards or the Tronxy Black Mask V6 board). How to Check Your Board: Turn off and unplug the printer. Flip the printer over or open the electronic control box.
Look at the revision number on your mainboard (e.g., CXY-V6, CXY-V8, or V10).