Gent Vigilon Commissioning Tool Install Jun 2026

Authorized System Integrators can download the latest version (e.g., V4.x or V5.x) directly from the technical support portal.

Proper installation is critical to ensure stable communication between your PC and the fire alarm panel. The following steps are compiled from official Gent documentation to guide you through the process.

The Gent Vigilon system is one of the most robust fire alarm platforms in the industry. To set it up, you need the (often referred to as the "Commissioning Software" or "Vig Tool"). This software allows engineers to program loops, define complex cause-and-effect logic, and manage device labels.

: Open Device Manager. Expand Ports (COM & LPT) . Change the Vigilon interface port to a number between COM1 and COM4. Post-Installation Checklist gent vigilon commissioning tool install

The "Commissioning Tool" is not a single monolithic program. It is a suite of modules designed to interface with the Vigilon panel’s loop controller. There are two primary hardware paths:

: Ensure the tool version matches the panel firmware, as certain features (like SD card commissioning or specific communication protocols) require compatible hardware and software versions. 3. Connectivity & Hardware Setup Connection Methods : You can connect to a Vigilon panel using: : Standard for most modern panels.

: Minimum 8 GB (16 GB recommended for massive multi-panel networks) The Gent Vigilon system is one of the

Older versions or specific tiers of the software require a secure USB software dongle. Insert the dongle into a USB port after the installation is complete so that Windows correctly maps the pre-installed drivers to the security device. Post-Installation Verification and Testing

Open the extracted folder and navigate to the folder corresponding to your PC's operating system (32-bit or 64-bit). Locate and run the setup.exe or install.msi file.

Before connecting to any live system, back up your local database directory ( C:\Program Data\Gent... ). : Open Device Manager

Always check for the latest USB Driver package bundled with the installer. Without the correct drivers, your PC won't recognize the Vigilon panel even if the software is installed. 3. The Installation Process

: You must be an approved Gent System Integrator or an authorized Honeywell partner to receive the installation files.

: The Vigilon panel should be located near a main entry or exit .

Close all open applications before launching the setup file to prevent file conflicts.