1208 Battery Charger Manual Exclusive — Bosch Kl

: Check that the battery's fluid level is correct (roughly 5mm above the lead plates) and unscrew any screw-plugs for standard batteries. Connection :

: Disconnect the terminals from the battery poles. Using the Battery Test Function

: Do not cover ventilation slots during operation as the device can become hot. Bosch kl 1208 battery charger manual

If the charger fails to perform or shuts down abruptly, review this diagnostic tree derived from the Bosch Systems Protocol :

Most manuals tell you to remove the battery. The Bosch KL 1208 exclusive manual reveals that you can leave the battery on the charger for up to 30 days. Once the battery is 100% charged, the charger cuts off entirely. When the battery self-discharges to 95%, the KL 1208 tops it off. This is ideal for winter storage.

"The KL 1208 is designed exclusively for batteries produced before 2022." If you have an old 12V Max drill, keep this charger. If you buy new 8.0Ah batteries, you need the charger.

: Battery acid is highly corrosive. If contact occurs, rinse immediately with soap suds and large amounts of water.

[Mains Power Off] ➔ [Connect Clamps: Red(+) then Black(-)] ➔ [Select "Charge" Mode] ➔ [Plug into Mains Supply]

Pin It on Pinterest

Shares