Check the box for "Main pad counter" and click on the "Read" button. The program will display the current percentage.
Inside your Epson M1100, a series of porous pads collect excess ink generated during setup, print head cleaning cycles, and borderless printing.
The printer refuses to execute any print commands, even if the ink tank is full and there are no paper jams. What is an Epson M1100 Resetter?
Several software utilities are available to perform this reset. Note that while some tools are free to download, they often require a to complete the final reset step. epson m1100 resetter
The resetter software does not physically clean the ink pad—it only resets the electronic counter, instructing the printer that the pad is empty again. It is a powerful tool that can save you from an expensive service call or the premature disposal of a perfectly functional printer.
To restore your printer to full working order without paying for expensive technical service, you can use an Epson M1100 resetter tool (also known as the Epson Adjustment Program). This comprehensive guide explains what the resetter is, how to use it safely, and alternative troubleshooting methods. Understanding the Epson M1100 Waste Ink Pad Error
The Epson M1100 resetter is a software tool designed to reset the internal Waste Ink Pad Counter back to zero. It communicates with your printer's firmware to tell it that the ink pads have been cleaned or replaced, allowing you to continue printing without replacing the hardware pads immediately. Check the box for "Main pad counter" and
, excess ink can eventually leak out of the printer and onto your desk or internal electronics. Security Warnings
The ink and paper lights flashing simultaneously or alternately.
The printer refuses to process any new print jobs despite having ink and paper. How the Epson M1100 Resetter Works The printer refuses to execute any print commands,
Disconnect all other USB devices from your PC to prevent signal confusion.
The Epson M1100 Resetter is a specialized software utility (often referred to as the Epson Adjustment Program or AdjProg) used by technicians to service the printer. The software communicates directly with the printer's firmware via a USB connection, allowing you to reset the Waste Ink Pad Counter back to 0%.