Keep the lower chamber organized; ensure excess PSU cables do not drift into the path of the lower radiator fans. Maintenance and Care
Community forums like HardForum 0;7f7; and r/watercooling remain the best places for tips on legacy SMA8-A revisions. 18;write_to_target_document7;default0;100b;18;write_to_target_document1a;_i1vtaYjHEouO8L0PtcmCiQY_20;2a; 18;write_to_target_document7;default0;61;
Place the top chassis frame panel over the four vertical pillars. Insert and loosely tighten the top screws.
Align the vertical corner posts with the pre-drilled holes in the base. Secure each post using the provided 6-32 chassis screws. caselabs sma8 manual
: Up to 560mm (4x140mm) or 480mm (4x120mm) radiators mounted sideways.
Secure it to the side pillars using four 6-32 screws per side. Step 3: Attaching the Top Panel and Rear I/O Frame Lower the top chassis panel onto the four vertical pillars. Fasten the top panel loosely to the pillars.
Install the lower horizontal support bars. This isolates the lower radiator/PSU chamber from the main chamber. Step 2: Mid-Plate Installation Keep the lower chamber organized; ensure excess PSU
Before beginning assembly, unbox all components on a soft surface to prevent scratching the powder-coated aluminum. Ensure you have the following structural pieces and hardware: Structural Components
Mounts at the bottom rear using the integrated PSU bracket.
Secure the radiator horizontally or vertically into the front profile. Insert and loosely tighten the top screws
For those building or restoring an SMA8, precise measurements are essential. The official technical data provided by CaseLabs is as follows:
To keep your CaseLabs SMA8 looking and functioning flawlessly, regular maintenance is required due to its aluminum construction.
Secure the rear PCIe modular bracket to the tray assembly using 6-32 screws.
Align the rear panel with the back vertical pillars and secure it tightly.