Narishige Pc10 Manual New _top_ Jun 2026

Check the nichrome heater coil daily for distortion, sagging, or carbon buildup. If the coil shape is uneven, replace it using the official Narishige replacement parts.

Your (e.g., patch-clamp, microinjection, or extracellular recording)

Press Start. If the glass does not melt within 15 seconds, turn off the unit, increase the dial by 5 units, and try again with a fresh capillary.

The PC-10 features an intuitive, analogue-digital hybrid interface designed for quick adjustment. Turns the unit on or off. Mode Selector (1-Stage / 2-Stage): narishige pc10 manual new

Any your unit is currently displaying Share public link

Adjust the mechanical weight stack located on the slider assembly. Creates long, gradual tapers with small tips.

Turn on the main power switch and allow the electronics to stabilize for 5 minutes. Check the nichrome heater coil daily for distortion,

1-Stage Pull: Heats the glass and pulls it apart in one continuous motion. Best for large-tipped tools like microinjection needles.

This guide serves as a detailed manual supplement for new users or those seeking a refresher on the operation, theory, and maintenance of the Narishige PC-10.

Double-check that the slider is fully engaged in its starting position. Press the button. If the glass does not melt within 15

So if you find one of those new community manuals? Treasure it. Print it. Laminate it. And maybe one day, pass it on to the next scientist who rescues a dusty PC-10 from the shelf.

The front panel layout provides direct control over the heating and pulling parameters: Turns the main system power on or off.

Loosen terminal blocks and realign the coil loop so it is equidistant from the glass on all sides. Check for uneven room drafts. The heating coil is warped or oxidized unevenly.

Detailed operational settings and maintenance tips can be found in the Narishige PC-10 User Manual.