A scatter file is divided into two main sections, each containing specific instructions for the flashing process:
A scatter file acts as a map for the device's internal storage (eMMC). It tells the flashing software exactly where to write specific parts of the firmware, such as the operating system, recovery, or bootloader. Without a correct scatter file, the flashing tool cannot communicate with the hardware to perform updates or repairs. Key Configuration Details The MT3367 scatter file typically follows the MTK_PLATFORM_CFG version V1.1.2 or higher specifications. It defines approximately 24 partitions
The tool will parse the file and automatically populate the checklist grid below with partition names, address values, and target locations.
The Ultimate Guide to MT3367 Android Scatter Files: Flashing, Firmware, and Recovery
If an MT3367 device encounters a software bootloop or fails to turn on, technicians load the scatter file into software like the . The utility uses the address parameters to rewrite damaged sections like the preloader or boot images, reviving the hardware. Performing Device Memory Backups mt3367 android scatter.txt
MT3367 Android scatter.txt file is a critical configuration file used for flashing, backing up, or repairing Android devices powered by MediaTek (MTK) MT3367 chipsets. It serves as a map that tells software tools (like SP Flash Tool) where to write specific firmware components (preloader, boot, system, recovery, etc.) into the device's eMMC storage. What is the MT3367 Scatter File?
: Defines exact hexadecimal addresses for storage partitions.
The target binary package name inside your firmware folder (e.g., boot.img ). If this is set to NONE , the flash tool knows this partition exists on the device but has no payload to flash.
Never check or overwrite the nvram or nvdata fields unless you have a dedicated backup. These partitions contain the factory radio frequency tunings, individual device serial numbers, and cryptographic keys unique to your specific logic board hardware. A scatter file is divided into two main
: Usually identical to the linear address, indicating the physical location on the chip.
This is a simplified guide. The exact process may vary slightly depending on your device.
Never load an MT6580 or MT6737 scatter file onto an MT3367 device. This will instantly hard-brick the device.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Key Configuration Details The MT3367 scatter file typically
: The initial bootloader responsible for initializing hardware. It is located at physical_start_addr: 0x0 within the EMMC_BOOT_1 region.
The MT3367 is not a standard smartphone SoC. It is an Automotive Grade chipset (part of MediaTek’s Auto series), often found in aftermarket car head units (radios) , specifically those running Android (typically Android 10-13).
At the very top, the file defines the hardware platform rules:
- partition_index: 0 partition_name: PRELOADER file_name: preloader_mt3367.bin is_download: true type: SV5_BL_BIN linear_start_addr: 0x0 physical_start_addr: 0x0 partition_size: 0x40000 region: EMMC_BOOT_1 storage: HW_STORAGE_EMMC boundary_check: true is_reserved: false operation_type: BOOTLOADERS reserve: 0x00