Xnx Universal Transmitter — Quick Start Guide

Follow the on-screen prompts to "Zero" the sensor in clean air.

In a standard environment, if you need to calibrate a device, you unplug it, open the casing, and press some buttons. In a Zone 1 or Zone 0 hazardous area (where explosive gases are constantly present under normal operations), taking a screwdriver to a device is literally asking for an explosion. Xnx Universal Transmitter Quick Start Guide

Working with gas detection equipment requires strict adherence to safety protocols to prevent personal injury and equipment damage. Follow the on-screen prompts to "Zero" the sensor

The transmitter enters a warm-up phase (usually lasting between 30 seconds and several minutes depending on the sensor type). The output current is held at a safe fault/warm-up level (typically 3.0mA) to prevent false alarms on the controller. Ensure the package contains the following items: Use

Ensure the package contains the following items:

Use the integrated mounting lugs to secure the unit to a wall or pipe. Ensure the sensor is pointing downward to prevent water or dust accumulation. Wiring: Open the housing using the provided hex key.