Ensure the battery pack is fully charged to prevent data corruption during transmission.
Connect the 3.5mm jack of the programming cable firmly into the radio's speaker/mic port. Turn the radio . Open the CS-V80 software on your computer.
With the radio powered OFF, plug the two plugs into the mic/speaker jacks on the side of the IC-V80. The 3.5mm plug goes into the SP jack. The 2.5mm plug goes into the MIC jack.
: This is the official utility from Icom for managing memory channels and transceiver settings. You can find the product details on the Icom Japan CS-V80 page or check Icom America for regional availability.
If Device Manager updates your COM port to a different number when unplugging and replugging the cable, update the software configuration match. Icom Ic-v80 Programming Software Download
Before writing any new frequencies, always pull the existing configuration from the transceiver to establish a stable connection profile. Open the CS-V80 software.
Ensure the cable is fully seated in the jack. Make sure the radio is ON. Check that you have selected the correct COM port in the software.
Ensure you use a high-quality USB-to-Radio cable (often with a CP2102 or FTDI chipset) to avoid driver issues.
Select "Write to Radio" to save your new settings. 💡 Pro Tips Ensure the battery pack is fully charged to
Look for something named USB Serial Port or Icom Radio Cable .
Access hidden features and memory channel banks that are cumbersome to manage via the keypad. 2. Official vs. Third-Party Software Options There are two primary ways to program the Icom IC-V80: A. Icom Official Cloning Software (CS-V80)
programmer. Both options require a compatible PC and a specific cloning cable to connect the radio's speaker/microphone jack to your computer. Official Icom Software: CS-V80
Modern, highly intuitive, and capable of importing data directly from RepeatersBook or RadioReference. Cost: 100% Free. 2. Step-by-Step: Icom IC-V80 Programming Software Download Open the CS-V80 software on your computer
Do not plug the cable into your computer yet. First, run the downloaded Icom USB driver installer. Once installed, plug the OPC-478UC cable into an open USB port. Step 2: Identify the COM Port
Before changing anything, select "Download from Radio" (or "Read from Radio") to save your current settings. This is your backup.
Icom IC-V80 is a rugged, military-grade VHF handheld transceiver popular among amateur radio operators for its durability and powerful 5.5W output. While the radio can be programmed manually, utilizing official or third-party software is the most efficient way to manage its 200 memory channels and complex menu settings. Essential Programming Software for the IC-V80