: Powers the compressor relay immediately (Compressor LED turns on).
The EMS 25 Advanced toggles between three distinct operating modes to balance beverage quality with maximum energy savings. Active Mode
The standby temperature maintained when the location is closed. Saving Time Elstat Ems 25 Advanced Manual
The compressor shuts down while the evaporator fan circulates air to melt frost build-up. 3. Entering Advanced Programming Mode (The "Key Dance")
Press again to confirm. The display will show the first parameter code (e.g., SP ). Critical Parameters Reference Table Parameter Code Description Default Setting Technical Purpose SP Operational Setpoint 3.0°C (37.4°F) : Powers the compressor relay immediately (Compressor LED
Minimum forced delay between compressor power-downs and restarts. 01 to 30 mins Standby Delay
A dusty condenser coil triggers the CO alarm, forcing the compressor to work harder and overriding any energy-saving modes. Saving Time The compressor shuts down while the
Use the and Down arrows to input the factory engineering password (refer to your specific OEM documentation, commonly 25 or 55 ).
To modify settings like temperature setpoints or display units, users must enter a specific button sequence, often referred to as the "key dance". Press and release the