lighting controller running on , you must download the appropriate virtual COM port or uDMX driver, disable Windows driver signature enforcement, and manually update the device via Device Manager. Because the Go to product viewer dialog for this item.

To get the CYL6602 USBDMX512 interface working on Windows 10/11, you generally need to treat it as a device using the

Background: device and driver overview

Without the correct driver, your lighting software (QLC+, Freestyler, DMXControl, Chamsys MagicQ) will either:

Submit the INF and cat file to Microsoft Hardware Dev Center for attestation signing.

This article provides a complete guide to finding, installing, and fixing the for a new setup or after a Windows update. What is the CYL6602 USB DMX512 Interface?

[DeviceList.NTamd64] %DeviceDesc% = WinUSB_Install, USB\VID_1234&PID_6602 ; Replace with actual CYL6602 VID/PID

Because the CYL6602 driver is not digitally signed, you must temporarily disable Windows 10’s driver signature enforcement:

Your computer will restart in a mode that allows the installation of the CYL-6602 driver. cyl-6602 working with Qlc 4 - Q Light Controller+

Uninstalling or reverting driver

Note: Your computer will return to its normal secure state the next time you restart it normally. Step 2: Sourcing and Downloading the Driver

The most popular free software. Requires the uDMX or FTDI driver to be correctly installed.

Once successfully installed, the device will usually move to the section as a "USB Serial Port" or under Universal Serial Bus controllers as an "Open DMX Interface". Step 4: Configuring Your Lighting Software