Wln Kd-c1 Usb Driver |link| ❲Recommended • Handbook❳

Which are you using? (CHIRP or the official WLN software?) I can provide custom steps to get your radio connected. Share public link

This typically happens with counterfeit Prolific chips on Windows 10 or Windows 11. Modern Windows updates automatically block non-genuine chips by throwing a "Code 10" error.

If your software fails to connect, re-verify the assigned port in Device Manager. If your software only allows selections from COM1 to COM4, but Device Manager assigned your cable to COM12, you can change it. Right-click the device in Device Manager, go to Properties > Port Settings > Advanced , and manually change the COM Port Number to an open lower number. wln kd-c1 usb driver

If your programming software displays a "Port not found" or "Cannot open port" error:

You will need to select this exact port inside your programming software. Step 4: Connecting and Programming Your WLN KD-C1 Which are you using

This message indicates that while the computer recognizes the USB cable, the cable is not communicating with the physical radio.

Most WLN KD-C1 cables use the Prolific PL-2303 or the CH340/CH341 chip. Right-click the device in Device Manager, go to

Click .

Before downloading files, you need to understand the hardware inside your programming cable. The cable features a standard USB-A connector on one end and a dual-pin (Kenwood-style) connector on the other. Inside the USB plug is a small chipset that converts your computer’s USB signals into serial data the radio can process.

The KD-C1 is often a rebranded version of other popular models like the Zastone ZT-X6 and the Retevis RT22. This is why many programming tools and drivers are compatible across these radios.