Zclever Security — Camera Manual

Connect the power splitter to the power adapter and then to the camera. Step 3: Power Up the DVR

Attach the camera and adjust the viewing angle before tightening fully. 3. Zclever Security Camera Setup (Wired & Wireless)

: Ensure a Hard Disk Drive (HDD) is installed and formatted via the system menu to enable recording. 3. Network and Remote Access To view your cameras on a smartphone or computer: Network Connection : Connect an Ethernet cable from your router to the RJ-45 port on the back of the DVR. zclever security camera manual

This manual covers everything from unboxing to advanced settings. If you have lost the physical "Quick Start Guide," this article will serve as your definitive reference.

Connect the other end of the BNC cable to the BNC port on the back of the DVR. Connect the power splitter to the power adapter

If you are locked out or setting up your DVR for the first time, try these common steps based on expert troubleshooting from sites like JustAnswer Default Password: The factory default is typically (no password). Just leave the field empty and select "OK". Password Reset via Remote:

If you continue to experience hardware failure (lens broken, no power, constant disconnects every 5 minutes), contact Zclever support via the "Feedback" section in the app. Provide your Order ID and a video of the issue. Zclever Security Camera Setup (Wired & Wireless) :

Wait for the indicator light to turn solid or flash, indicating it is connected to the network. Method B: Wireless (Wi-Fi) Setup Power on the camera and wait for it to boot up.

If you forget your password or the system becomes unresponsive: Zclever Security Camera Manual & DVR Setup Help 20 Mar 2020 —