Amada Pega 357 User Manual Jun 2026

Typically 58 stations (including 2 auto-index stations). Hit Rate: Up to 350 hits per minute (HPM) at a 1" pitch.

| Specification | Details | Source | | :--- | :--- | :--- | | | 30-33 Tons | Elite Machinery, 1989 Grays listing | | Control System | Fanuc 04PC | Elite Machinery, IndustryArena CNC Zone | | Turret Stations | 44 or 58 stations (with 2 auto-index on many) | Manual Machine Pega 357 Installation Guide, 1989 ManMonthly | | Max. Hole Diameter | 4 1/2″ | Elite Machinery | | Max. Material Thickness | 1/4″ (Mild Steel) | Elite Machinery | | Axis Travel | X: 72″ (1828 mm), Y: 50″ (1270 mm) | Elite Machinery, 1989 ManMonthly | | Max. Sheet Size (w/reposition) | 50″ x 144″ (4′ x 12′) | Elite Machinery, Machinio listings | | Strokes per Minute | Up to 350 hits/min | Elite Machinery | | Axis Speed | Up to 2,000 IPM | Elite Machinery | | Air Requirement | 80 PSI | Machinio listings | | Machine Weight | Approx. 30,000 lbs (13,600 kg) | Elite Machinery, 1989 Grays listing |

50” × 72” (1270 mm × 1830 mm)

Check for debris, cracks, or loose bolts on the pneumatic sheet clamps. amada pega 357 user manual

Programs are typically loaded via RS232 or punched tape in legacy systems.

Typically configured with 44 or 58 stations (including Auto-Index stations)

Incremental programming mode (coordinates referenced from the current tool position). Typically 58 stations (including 2 auto-index stations)

Operators use the CRT screen and alphanumeric keypad to manually enter code or adjust existing programs.

Used for entering, altering, or deleting G-code programs via the keyboard.

Perform the "Home" or "Zero Return" sequence to allow the carriage and turret to align correctly. Operational Modes (Fanuc 04PC): Hole Diameter | 4 1/2″ | Elite Machinery | | Max

If you are currently looking for a specific section of the manual, let me know:

is often used for reference if the specific Pega version is unavailable. ⚙️ Key Specifications & Maintenance According to technical summaries, the requires regular checks to ensure precision: Daily Tasks:

If the program brings a punch too close to a workholder, the clamp sensor will trigger a safety block. Reposition clamps or adjust the program code.

These specifications are critical for programming and safety limits: NC-9EX II Operating Instructions | PDF - Scribd