In the software, look for a "Connect" or "Read" function. If the software successfully communicates with the K150 board, it will display the programmer's firmware version or a "Connected" status. Step 4: Programming Your First PIC Microcontroller
USB-to-Serial Bridge Controller. Modern Windows 10/11 drivers often disable this older hardware because many units contain non-original chips. www.davidpilling.com The Solution : To make the K150 work on Windows 10, you must install an older legacy driver
: Ensure the PIC microcontroller is facing the correct direction in the ZIF socket. Pin 1 must line up with the orientation specified by the software's onboard help tool.
The K150 is one of the most budget-friendly and accessible USB PIC microcontrollers (MCU) programmers available on the market. Designed to bridge the gap between hobbyist embedded systems and hardware programming, it provides a straightforward way to load compiled code (HEX files) onto Microchip's popular PIC MCUs. k150 pic programmer software windows 10
: The K150 draws its power directly from the USB port. If you are using a front-panel USB port on a desktop or an unpowered USB hub, the voltage might drop too low. Plug the programmer directly into the motherboard USB ports at the back of your PC.
Below is the most reliable method to get your working using PICPGM. This guide assumes you have a CH340-based clone (90% of users).
Extract the ZIP folder to a dedicated directory on your local drive, such as C:\K150_Programmer\ . Avoid running the software directly from inside a compressed ZIP folder. Step 2: Install the Compatible PL2303 Driver In the software, look for a "Connect" or "Read" function
However, getting the is notorious for causing headaches. This is primarily because the programmer relies on a USB-to-Serial chip (PL-2303) that is frequently cloned, and modern Windows 10 updates actively block the drivers for these counterfeit chips.
: Operates 3–5 times faster than traditional PICSTART+ programmers. Dual Programming Modes :
The yellow exclamation mark should instantly disappear, and Device Manager will display a clean COM port assignment (e.g., COM3 or COM4 ). Note this COM port number down. Modern Windows 10/11 drivers often disable this older
Some users prefer WinPic800 because it has a better device database.
If you're unable to get the K150 PIC programmer software to work on Windows 10, there are alternative software options available. Some popular alternatives include: