unless you are prepared to use a dedicated programmer (like an ST-Link) to recover the original software, as the oscilloscope functionality is proprietary and will be lost. Seeed Studio Forum Are you currently facing a specific bug or looking for a specific feature (like ESR testing) that led you to seek a firmware update?
Use a Type-C data cable to connect the device to your computer while it is powered off . Booting: Power on the device and wait about 2 seconds. dsotc2 firmware upd
By keeping your DSOTC2 firmware updated, you ensure the best possible performance for your rig. If you'd like, I can: unless you are prepared to use a dedicated
| Method | Interface | Steps Summary | |--------|-----------|----------------| | | USB | Bootloader mode → host software sends firmware → verify → reset | | Web UI | Ethernet/WiFi | Login → navigate to Firmware Update → upload file → apply | | SD Card | SD slot | Copy firmware to FAT32 card → insert → reboot → automatic update | | Serial (UART) | RS232/TTL | Use XMODEM or vendor CLI → send firmware → write to flash | Booting: Power on the device and wait about 2 seconds
: A computer running Windows 10 or above is strictly required. MacOS and Linux are not natively supported for this mass-storage bootloader mode.
If you want, I can: