Achieve full control with this next generation restaurant management software. A complete solution, from taking orders to billing and tax reports.
Check the pattern of the beeps. Continuous short beeps or a single long beep repeating usually indicates a memory (RAM) error. Try removing the RAM, dusting the slot, and reinserting a single stick into the first slot to test it.
The front panel header is typically a 9-pin or 14-pin block found on the bottom right corner of the board. For Acer boards, the standard front panel configuration maps out as follows:
With everything plugged in, connect your monitor to the motherboard's rear video ports (or your graphics card if installed), plug in the power cord, and flip the PSU switch to "On". Common Post-Install Issues Probable Cause acer aahd3vc motherboard manual install
Connect to Pins 5 and 7. Orientation does not matter.
It is much easier to install these components before securing the motherboard inside the chassis. Check the pattern of the beeps
The is a Micro-ATX motherboard commonly found in pre-built Acer Aspire (e.g., M3420) desktop computers. Featuring the Socket FM2 and the AMD A75 chipset , it supports AMD A-Series APUs, making it a capable board for budget, office, or entry-level gaming setups.
Top Row: [ PLED+ ] [ PLED- ] [ PWR_SW ] [ PWR_SW ] [ NC ] Bottom Row: [ HDLED+] [ HDLED-] [ RESET ] [ RESET ] [ EMPTY ] Use code with caution. The front panel header is typically a 9-pin
Look at your AMD processor. Find the small golden triangle printed on one corner.
Plug the 4-pin (or 4+4 pin) ATX 12V power cable into the dedicated CPU power connector located near the processor socket. Failure to plug this in will result in the fans spinning but no video signal (No POST).
Connect front-panel USB 2.0/3.0 and HD Audio cables.
The AAHD3-VC front panel header is often a, 10-1 or 14-1 pin configuration. The most critical part is correctly connecting the Power Switch.
Works seamlessly with all major restaurant hardware
Supports OPOS drivers, Windows drivers, and direct COM port commands
Sold in 75+ countries worldwide
Join thousands of restaurant owners worldwide who trust Abacre Restaurant POS for their business operations.
Trusted by restaurant owners around the world
"I opened my first restaurant and was searching for non-expensive and robust restaurant management software. After considering many different systems I found that some of them are very expensive and others quite buggy. Lastly I concluded that only Abacre Restaurant Point of Sale fully satisfies my needs and I bought it."
Download the full-featured 30-day trial version. No credit card required.
Version:
Choose the license that fits your needs
For small single-terminal restaurants
For multi-terminal restaurants
For large restaurant chains
Join thousands of satisfied restaurant owners using Abacre POS
Get Started Now