: The water level in the borehole is maintained at a constant height above or below the static water level, and the volume of water required to maintain this level is measured over time. Equipment and Technical Requirements
BS 5930 itself has not disappeared entirely. A revised version, BS 5930:2015+A1:2020, is still current, but it no longer includes the detailed testing procedures that are now covered by the ISO 22282 parts. In the words of the BSI, the ISO 22282 series “partially supersedes BS 5930”, and BS 5930 has been revised to remove conflicting material.
Specifications for ensuring the hole is stable and properly prepared.
Providing contractors and engineers with a standard to follow, ensuring consistency in data collected. bs en iso 22282-2 pdf
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
: Testing can be executed in both saturated and unsaturated zones , measuring ground properties both above and below the native groundwater table. Core Test Methods Covered in the Standard
Before searching for a "bs en iso 22282-2 pdf", engineers must understand the value of the document. Here is why compliance matters: : The water level in the borehole is
For variable head : Rapidly add or extract water to achieve the starting head difference.
BS EN ISO 22282-2 is part of a series on geohydraulic testing. Understanding its relationship with the other parts is beneficial for a holistic approach to ground investigations. The full series consists of the following parts:
Measuring the rate of water level rise or fall (rising/falling head) after an initial displacement. In the words of the BSI, the ISO
This is the preferred method for depth-specific permeability measurement. A packer system (either single or double) is used to seal off a discrete length of the borehole.
is an essential technical standard for any geotechnical laboratory or field testing company conducting borehole permeability tests using open end or packer systems. It ensures consistency, repeatability, and international recognition of test results.
: Defines applicability for geotechnical investigations under EN 1997-1 and EN 1997-2.
: Maintaining a constant pressure head and measuring the resulting flow.
: Devices must have an accuracy within 5% of their range.
