Blue Tape | Walkthrough Checklist Pdf Better

Test every outlet (using a cheap outlet tester) to ensure they are wired correctly. Switches: Turn every light switch on and off.

A Blue Tape Walkthrough is the final, detailed inspection of a newly constructed home that takes place before the closing date. It gets its name from the simple, practical tool used during the process: blue painter's tape. This process is a collaborative effort between you, the buyer, and the builder's representative, during which you walk through the entire property together.

| Appliance | What to Check | |---|---| | | Run a short cycle; check for leaks underneath; listen for unusual noise | | Oven / Range | Turn on every burner; oven reaches set temperature; broiler works; self‑clean cycle (if applicable) operates | | Refrigerator | Ice maker and water dispenser function; temperature controls work; door seals airtight | | Microwave | Runs and heats properly; turntable rotates (if applicable); vent fan works (if overhead) | | Garbage disposal | Runs without excessive vibration; no leaks underneath | blue tape walkthrough checklist pdf better

Useful for finding fillable "Residential Home Inspection Walkthrough" forms that you can save as PDFs after editing. blog.jome.com What to Bring With You What Is A Blue Tape Walkthrough Checklist?

Preparation is the foundation of a successful Blue Tape Walkthrough. Going in with a plan and the right tools will transform you from an excited homebuyer into a confident inspector. Test every outlet (using a cheap outlet tester)

Once you finish your walkthrough, the work isn't over. Follow these steps to ensure your identified issues actually get fixed.

But here is the problem: Relying on memory and a roll of tape often leads to missed items, disputes, and re-inspections. The solution? It gets its name from the simple, practical

: Run every faucet for several minutes. Check underneath the sinks with a flashlight for leaks. Test the hot water. Flush every toilet to ensure proper drainage and filling.