The Ultimate Guide to Canon Service Resetter Tools: Fixing 5B00 and Ink Absorber Errors

To use the (software used to reset waste ink counters and fix errors like 5B00), you must first manually put your printer into Service Mode . Without this step, the software will not recognize the device. 1. Enter Service Mode (Button Sequence)

Error codes such as 5B00, 5B01, 1700, 1701, and "The waste ink tank is full".

Using the service tool requires careful preparation to avoid permanent printer damage (resulting in Error 006, which signifies a dead logic board). 1. Enter Service Mode The printer must be in "Service Mode" for the tool to work.

Resetting the digital counter does not magically clean the ink pads. If you reset your printer multiple times without replacing or washing the physical foam pads, ink will eventually leak out of the bottom of your printer and ruin your furniture.

Here’s a for content about a “Canon service resetter tool,” written for an informational or support-style page (e.g., a blog, forum, or FAQ).

When using the service tool, you might encounter an error. Here are the most common ones:

Modern Canon consumer inkjet printers (e.g., PIXMA series) include a that collects ink purged during cleaning cycles. The printer tracks the amount of waste ink using a counter stored in EEPROM. When the counter reaches a factory-set limit (e.g., 7% of pad capacity), the printer displays a "5B00" or "5B01" error and locks operation, requiring replacement or resetting.

At its core, the Canon Service Resetter Tool (often referred to as the Canon Service Tool or Service Support Tool) is an unofficial software application designed to perform low-level maintenance on Canon printers. It is not a tool released to the general public by Canon; rather, it is an internal utility intended for use by authorized service technicians at official Canon repair centers. Over time, these tools have been leaked and circulated online within technical communities, providing advanced users and repair professionals with a way to service their own printers.

Compatibility is the single most critical factor when looking for a resetter tool. Using the wrong version cannot only fail to fix the error but can also permanently corrupt the printer's EEPROM data, making the device impossible to repair without specialized hardware equipment.

Years ago, Service Tools were freely shared online. Today, sellers on eBay, AliExpress, and other platforms sell access to the latest versions for newer printer models. Free downloads exist but are often outdated, difficult to locate, or risky.

The printer locks itself completely to prevent ink from leaking onto your desk.