: The TS1162 includes a 2-meter pre-wired LiYY cable. If extending the cable, use a high-quality twisted, shielded pair for the RS-485 data lanes (D+ / D-). Avoid making tight wire loops inside adjacent junction boxes [1.11].
Merely wiring the TS1162 is not enough; you must instruct the Challenger panel to recognize and communicate with it. Programming is usually achieved via the or ChallengerPlus keypad programming menu or via management software like Forcefield. Step 1: Assigning the RAS Address
Used for assigning the device address in a networked system.
. Adhering to these specifications guarantees compatibility and protects internal circuitry from voltage drops. Specification Aritech Challenger Series
can be connected directly to the Challenger RS-485 LAN at this distance Elias connects only
The , also known as a Remote Arming Station (RAS), is a robust access control device designed for use with Challenger series control panels. Because it is a professional-grade security component, its full installation and programming manuals are often restricted to trained installers via secure portals. Key Technical Specifications
The keypad includes a for connections. Make the following connections:
Integrates with Challenger panels & Intelligent Access Controllers. RS-485 LAN Bus Supports standard multi-drop topology configurations. Maximum Bus Length Up to 1.5 kilometers (4,921 feet)
Connect the 12-24V DC or 12-16V AC power supply to terminals 1 and 2, ensuring correct polarity.
: Mount the device at an accessible height (typically 1.2 meters nominal) [1.1]. Ensure the rear optical tamper sensor sits flush against a completely flat, non-flexing wall surface to prevent false tamper conditions.
Whether you are deploying this unit as an outdoor security perimeter pad or an industrial zone arming station, proper physical alignment and proper wiring are critical to maintaining data signal integrity across long distances. This guide provides specialized technical insights, installation sequences, and configuration data pulled from trained-installer resources. Technical Profile & Core Specifications
. It can be positioned up to 1.5 km away from the main panel. : The unit includes one input for Request to Exit (RTE) control and one open collector output typically used for a door relay or strike.
Tecom TS1162 (also known as the 3 LED RAS) is a robust Remote Arming Station (RAS) designed for use with Challenger security systems. Rated
Wire the open collector output to the relay coil or access control strike (ensure you utilize a flyback diode on the relay coil to protect the TS1162's PCB from inductive voltage spikes). 💻 Panel Programming and Configuration
Upon receiving your , carefully unpack it. Do not use sharp items that could damage the packaging or the unit.
: The onboard 10 mA open collector output is intended to switch a low-current relay coil. Crucial: Do not wire a heavy electronic door strike directly to this output. Always use an external interposing relay module with flyback diode protection to handle the inductive lock current. 4. Addressing and Software Configuration
For more technical details, you can find official documentation through the Aritech Support Portal Are you installing this for a new construction project or retrofitting an existing system? Remote Arming Station (RAS) Keypad, 3 LED - Aritech
