Your computer should now recognize the oscilloscope as a portable USB flash drive. Step 3: Flash the New Firmware
on their website . If you proceed, ensure the firmware you use matches your hardware revision exactly .
Leo began his mission by visiting the Owon Download Center , navigating to the HDS200 Series to find the latest firmware, version 1.51. The Transformation Process
The device features a 3.5-inch high-resolution color LCD, runs on rechargeable 18650 lithium batteries (providing approximately 6 hours of operation), and includes USB Type-C connectivity for charging and PC communication. owon hds2102s firmware update
Failing to prepare properly is the leading cause of failed firmware flashes. Gather these items before proceeding:
Click "Upgrade" or "Start". Do not unplug the cable or turn off the PC during this process.
There are two primary methods to update the HDS200 series, depending on the update package. The most common method involves placing the unit into MSC (Mass Storage Class) mode. Method 1: Direct File Copy (MSC Mode) Turn on your Your computer should now recognize the oscilloscope as
According to OWON's official support website, the latest firmware version available for download is . However, several users have reported receiving units with newer firmware versions like V4.3.0 directly from the factory.
If you've confirmed that an update is available and compatible with your device, follow this step-by-step guide. The official method requires a USB connection to a PC, not a USB flash drive.
If you have never connected your Owon scope to your PC, you must install the CH340 or relevant USB-to-serial drivers provided in the software package. This allows your computer to communicate with the oscilloscope's bootloader. 3. Connect the Device in Update Mode Power off the HDS2102S completely. Leo began his mission by visiting the Owon
The handheld digital oscilloscope is a favorite among engineers, hobbyists, and field technicians. It combines a 100MHz dual-channel oscilloscope, a full-featured multimeter, and a 25MHz waveform generator into a single portable package.
Safely eject/unmount the USB drive from your operating system to ensure data integrity. Step 4: Complete the Installation Process
Open the newly recognized portable drive folder on your computer.