Sharp Atomic Clock Spc373 User Manual ~repack~

The Sharp SPC373 Atomic Desktop Clock is a popular timekeeping device known for its accuracy, automatic adjustments, and sleek design. Because it relies on radio signals to stay perfectly synchronized, setting it up correctly is essential.

If the clock does not auto-set within 24 hours, you can set it manually: Enter Set Mode : Press and hold the ) button for 2–3 seconds until the display flashes. Adjust Values buttons to change the flashing digit. : Press the

: If the signal won't reach you, you can manually set the time by holding the M.SET or SET button until the hands start moving, then releasing it once you reach the correct time. sharp atomic clock spc373 user manual

: Place the clock near a window overnight. It may take up to 24 hours to receive its first signal. Manual Configuration

To turn the alarm , toggle the ALARM ON/OFF switch to the ON position. An alarm icon (usually a bell) will appear on the display. The Sharp SPC373 Atomic Desktop Clock is a

: Press the ALM ON/OFF button to enter Alarm 1 or Alarm 2 mode. Press and hold ALM ON/OFF until the hour flashes, adjust with UP/DOWN , and press again to set minutes.

If you live in an area without WWVB coverage (e.g., remote Alaska, deep valley), you can disable atomic sync and set time manually: Adjust Values buttons to change the flashing digit

Press the WAVE button (or "Search" button) to force the clock to search for the signal again.

For additional assistance, you can contact the manufacturer, , at 1-800-221-0131 . Sharp atomic clock spc373

But the manual had a final instruction, hidden in the safety warnings: Do not expose to extreme temperatures, direct sunlight, or despair.