Do you need help identifying a specific ? Share public link
: Clean and lubricate the guide rods before threading cables to ensure smooth operation. Main Cable
Install low row footplate or pulley base pacific fitness del mar home gym assembly manual
Connect left and right base stabilizers. Attach bottom weight stack guide rods to base.
: Once threaded, align the cable retainer and tighten the pulley's mounting bolt. Remove tension from the cable by inserting the selector pin above the top weight if you need to adjust or replace parts. National Gym Supply Manual and Support Resources Downloadable Manual : While hard to find on official sites, you can find the Manual for the Delmar 9H exploded diagrams through specialized parts retailers like FitnessRepairParts.com Replacement Parts Do you need help identifying a specific
| Part | Typical part number (Pacific Fitness system) | |------|-----------------------------------------------| | Weight stack plates | 95010 (varies) | | Guide rods (2) | 95015 | | Top pulley bracket | 95020 | | High pulley cable | 95030 (approx. 120 inches) | | Low pulley cable | 95031 (approx. 90 inches) | | Press arm cable | 95032 (approx. 60 inches) | | Leg developer | 95040 | | Lat bar | 95050 | | Seat pad | 95060 | | Back pad | 95061 |
: Feed the main cable over the top upright pulley and down through the guide rod bracket. If replacing cables, a 5mm to 6mm thick PU-coated cable is standard for many Pacific Fitness models. Expert Advice for Used Units Attach bottom weight stack guide rods to base
Two adjustable wrenches (or a complete metric/standard socket set) A set of Allen (hex) wrenches
Attach leg developer bracket to lower front frame. Install foam rollers, weight horn, and leg curl/extension bar.
Look for dotted lines with arrows. This is the most skipped section, but it is the most important. The cable typically follows this path: