Find the newly installed icon, right-click it, and select Printer properties . Click on the Ports tab.
Click Add Port , select Standard TCP/IP Port , click New Port , and enter the specific static IP address assigned to your printer. Click Apply to save the changes. Step 5: Printing a Test Page
If you are using a standard cable, select USB . black copper pos p80 driver setup v7.17
I can provide customized troubleshooting steps for your exact setup. Share public link
: You can typically find this driver on the Black Copper Support Page or generic repositories like UpdateStar . 📥 Installation Steps (v7.17) Find the newly installed icon, right-click it, and
Print a self-test page (hold the button while turning on the printer) to find its default IP address. In the Ports tab of Printer properties , click Add Port . Select Standard TCP/IP Port and click New Port .
Check the readme_pos717.txt or visit the POS thread on ECF (E-Cigarette Forum) – Black Copper P80 edition. Click Apply to save the changes
Before you try to print from your POS software (like QuickBooks, Tally, or custom billing software), run a Windows test page.
Setting up the printer to work with specific (like QuickBooks or Nexchar). Troubleshooting if the test page isn't printing. Let me know which area you'd like to explore next!
Ensure is selected rather than POS-58. For serial connections, match the bits-per-second rate in Port Settings to the printer's self-test speed. Installer fails with "Driver signing" error Windows security blocking unsigned legacy drivers.
Choose the installation folder (default is usually fine) and proceed until you reach the configuration screen. Step 3: Configuring the Driver Settings